Plan a flat two-panel sleeve with one open top. This is a geometry study, not a tested wallet pattern or a capacity guarantee.
Edit the planning assumptions
All starting values are design examples. Changes stay in this page’s memory; no plan is uploaded or saved automatically.
Your planning sheet
Original construction schematic, not to scale. Use the numerical panel list and prototype checks.
Panel list per item
Part
Cut size (cm)
Count
Front and back cut panels
10.00 × 7.00
2
Flat horizontal clearance
0.64 cm
Flat vertical clearance (conservative rectangle)
0.80 cm
Nominal two-panel stack
2.40 mm
Three-sided seam centre line
21.60 cm
Net cut area per item
140.00 cm²
Purchased area per item
0.20 sq ft at 75% yield
Purchased area for batch
0.20 sq ft
Leather cost per item
1.61 currency
Hands-on labour per item
37.50 currency
Total cost per item
41.11 currency
Target price per item (no percentage sales fee)
54.81 currency
Area is not a nesting solution. Yield, labour and cost inputs are assumptions until replaced with actual records. Values shown are rounded; calculations retain full precision.
Text version to copy
Continue with a tool
Links pass the current panel list, cost or batch values where compatible. Other tool assumptions still need checking. Check thread pitch, material thickness and supplier pack sizes in the destination tool.